ATX® Power Rack - complete station - 620 with plate load lat pull-down station height 218 cm

ATX® Power Rack - complete station - 620 with plate load lat pull-down station

Height 218 cm

Item no.: ATX-PRX-620-LTO

incl. 1 pair of heavy-duty J-hooks

incl. 1 pair of pin pipes - emergency racks

incl. integrated multi-grip pull-up bar

incl. lat pull-down station - plate load

With a total height of 218 cm, the ATX® Power Rack complete station PRX-620-LTO is 20 cm higher than our identical model PRX-610-LTO and therefore offers more pretension and lifting range, e.g. at the pull-up bar or the lat pull-down station. Depending on your requirements and ceiling height, you can choose your preferred version from these two models.

Our PRX-620-LTO power rack complete station consists of the ATX® PRX-620 power rack and the ATX® LTO-620 lat pull-down unit. The comfortable interior offers optimum freedom of movement and maximum safety for training. The rack is made of sturdy 60 x 60 x 2 mm sectional steel tubing. Thanks to the torsion-free, stable construction with extra reinforced gusset plates, the rack can bear loads of up to 650 kg. The heavy-duty J-hooks and the pin-pipes emergency shelves are included in the scope of delivery, as is the integrated multi-grip pull-up bar. The posts of the Power Rack with 34 holes are marked on the inside and outside; this ensures precise and quick positioning of the J-hooks and emergency shelves. Additional holes in the floor struts allow band pegs to be attached for training with resistance bands. Despite its lightweight design, the lat pull-down station is very robust and can support loads of up to 140 kg! Due to the direct weight ratio of 1:1, there is no loss of load / no bottle effect! Pulling exercises can be performed using the upper and lower pulley without conversion. The weight carriage runs on a chrome-plated square tube and is fitted with special sliding strips, the pulleys are mounted on ball bearings and the plastic-coated steel cables are stretch-free, ensuring smooth and jerk-free running.

The ATX® PRX-620-LTO is a complete power rack system with unmistakable ATX features: heavy-duty, top functionality and workmanship, outstanding design - a device with maximum added value! Unrivaled in this price/performance class!

Quality Products Designed in Germany - Certified according to EN 20957 I.II.IV Class H

Overview - Power Rack PRX - 620

• Overall height 215 cm
• Torsion-free, stable construction made of 60 x 60 x 2 mm thick sectional steel tube with reinforced gusset plates
• heavy duty - up to 650 kg
• 34 holes/position heights
• with position scaling for precise and quick positioning of the J-hooks and emergency shelves
• including 1 pair of J-hooks made of 10 mm thick strip steel + 10 mm thick rubber protectors to protect the barbell bar and minimize noise
• including 1 pair of pin-pipe safety emergency racks, made from Ø 20 mm round steel + Ø 38 x 3 mm thick steel tube
• including Multi Grip pull-up bar Ø 27 mm, knurled for extra grip
• with additional perforations in the floor struts,
• enables the attachment of band pegs for training with resistance bands
• With protective feet, floor-friendly and non-slip

Overview - lat pull-down station

• heavy duty - up to 140 kg
• No loss of load due to direct 1:1 weight transmission
• upper and lower pulley can be used without conversion
• good smooth running properties thanks to sliding strip guide and ball-bearing mounted pulleys
• non-stretch steel cables with black plastic protective coating
• with foot brace plates for support when rowing in a seated position
• incl. extension chain for attaching various pull handles and for adjusting the optimum pulling position
• incl. 2 snap hooks
• Weight plate holder Ø 30 mm x L 21.5 cm as standard, can be quickly and easily upgraded to Ø 50 mm with our adapters (item: BB-OA-250-PVC) as an option
• Total height of the lat pull-down station 218 cm
• Dimensions & weight - complete station
• Width: 121 cm
• Depth: 163.5 cm
• Height: 218 cm
• Total weight: 101 kg

With optimally coordinated options such as dip bars, landmine, utility board, T-bar row, foam roller and our first-class flat and multi benches, the range of exercises can be extended even further.

The weight bars, weight plates, pull handles, adapters, dip bars and spotter arms shown are not included in the scope of delivery!

Optional accessories

We will be happy to provide you with a quote including shipping costs. Simply ask us using the contact form or call us on 0049 911 521919-10.