ATX® Multi Bar - 20 KG - 190K - Graphite Black Cerakote

ATX® Multi Bar / Hybrid Bar with original Cerakote® coating "Graphite Black"

Item no.: LH-50-ATX-CK-300

This high-quality barbell has a tensile strength of 190,000 PSI / 190K and can be loaded up to 600 KG. International dimensions and weight as well as the dual grip width marking IWF 810 mm / IPF 910 mm - without center knurling - ensure multifunctional applications. The mounts are coated in black chrome and offer very good wear and corrosion protection, while the high-quality bronze bushing bearing ensures smooth rotation when repositioning or snatching (clean & snatch).

The excellent balance between strength and toughness, the good grip knurling and the great finish will inspire you!

ATX® Cerakote Multi Bar / Hybrid Bar - Graphite Black

• professional Multi Bar with original Cerakote® coating - Graphite Black with
• black imprint "Athletic Training Xtreme
• high quality tempered steel according to EN 102775-5
• Tensile strength (Tesile Strength): 190,000 psi
• = 190 K (K/KSI = kilopounds per square inch)
• high load capacity + 600 kg
• Knurling: Precision knurling - RGE 30° - medium
• International dual grip width marking IWF / IPF - 910 / 810 mm
• without center knurling
• Mounts / coating in black chrome
• mounts / bearings: high-quality maintenance-free bronze bushings
• Suitable for all commercially available weight plates with Ø 50 / 51 mm bore
• High-quality encapsulated end faces with safety ring
• End cap with ATX® logo
• Total length: 220 cm
• Handle diameter: 28.5 mm
• Weight: 20 KG

Note original Cerakote® coating

The original Cerakote® coating is a wafer-thin, slightly transparent, silky matt ceramic coating,

which provides very good contact with the bar and a secure grip.

The colored coating has a great look, is impact-resistant and has excellent resistance to corrosion.

With correct handling and care, the coating has a long service life.

*Note: Contact / placement on unprotected metal shelves / J-hooks etc. can damage the coating of the bar.

We therefore recommend placing it on plastic or rubber-coated shelves.

ATX® offers first-class, tested and proven equipment for professional use.

The barbell bar has optimally coordinated mechanical characteristics of strength<>toughness. This means that the bar can be deformed up to a certain tension (elastic limit) and then return elastically to its original state without permanent deformation. The decisive factor here is the optimum high-quality alloy.

Whether for weightlifting or powerlifting, ATX® barbell bars withstand even the most extreme demands and therefore meet the highest requirements.

ATX® offers first-class, tested and proven equipment with a long-term guarantee!

The ATX® barbell bars are tested for continuous and maximum load in our in-house test center and undergo the following material tests in an independent German test laboratory:

• Tensile test acc. to DIN EN ISO 6892-1
• Tensile test acc. to DIN EN ISO 6892-1
• Notched bar impact acc. to DIN ISO 6892
• Rockwell hardness acc. to DIN EN ISO 6508-1
• Hardness Rockwell acc. DIN EN ISO 6508-1
• Metallographic examination - Qualitative determination of the metal structure

We will be happy to provide you with a quote including shipping costs. Simply ask us using the contact form or call us on 0049 911 521919-10.